Switch to desktop viewElectroincs in action
You are in: Products > Automobile > HRR2 > 101.07

Injector and IAC valves tester

Code : HRR2

Poduct comment::«Excellent price and quality. Excellent and practical, it does everything it says easily (ML)»

Injector and IAC valves tester

The car engine of injection between years 1990 and 2008 have a valve to control the idle speed. This valve is called IAC (Idle Air Control) or commonly called stepper motor.
This valve is a common fail cause.

The car engine of indirect injection have coil based injectors, they split in two big groups: High and Low impedance.
This device can test almost all IAC valves and Stepper of car industry, both groups of injectors.

Is the tool more easy to use of the market.

Manufactured for hard work, with a high endurance.
The device test multiple IAC types ( Steppers, PWM, Continous current etc)
Is a elemental tool for any modern mechanic and avanced users.

Prueba PAP tipo Rover/Mitsubishi

Test a Rover stepper is very easy.

1)Connect the HRR2 and wait for lights blinking.
2)Plug the stepper and wait one seccond
3)READY ! so easy the led 5W is turned on.

4)The buttons of right and left open and close the motor.
5)If press both side buttons at same time will start an automatic opening and close cycle.

This motor is a stepper of four coils stepper motor with a common supply.


Single cell Li-ion Li-polymer battery charger for GPS tracker
This circuit was designed to charge port...
Smart Headlight reminder