Logo
Switch to desktop viewElectroincs in action
You are in: Products > Automobile > TAU2 > 811.06p

Complete Engine protector for cars, 2 Temperatures, Oil, Voltage w/Alarm and shutdown


Code : TAU2




Poduct comment::«No comments, be the first»
Status : Selling
To buy this product please visit our store, following the link

Complete Engine protector for cars, 2 Temperatures, Oil, Voltage w/Alarm and shutdown


This device is essential to save the engine live.
The overtemperature is the most frequent cause of car engines dead.
The red Light or original indicator generally only advice after damage.

Knowing the importance of temperature control, this device measure 2 temperatures simultaneously.
Coolant temperature and in leak case take the control another sensor into the head cup will take action.
Also monitor the Oil pressure and charge voltage to alarm to the driver and save the engine.

So easy to install as connect 12v, ground, and probe.
Economic, small and efficient.


Install diagram

The electric installation is easy, only you must follow the diagram:
image
Fan connection
Measure the voltage in both fan terminals, and write in a paper the values when the fan is turned off.
Turn on the engine and wait that the fan turn on and write again the news values.
Check with the following tables to see what is more like to your annotations.
Example 1:
Fan OFF
Fan ON
Cable1
12v
12v
Cable2
12v
<6V

If you annotation is like example 1 connect the yellow cable to cable 2

Example 2:
Fan OFF
Fan ON
Cable1
0v
0V
Cable2
0v
>6V

If you annotation is like example 2 connect the yellow cable to cable 2

Oil bulb connection
The device measure the voltage present in the original engine oil bulb, and share the same connection, you dont need remove or change anything. When the voltage in Orange cable is less to 5v the device understand that there is no oil pressure and will trigger the alarm and shutdown. To enable this alert the engine need get pressure in some moment.
image

Relay connection
You can optionally install a shutdown for the engine. There are many ways to stop a engine, the installator must be take care to choose the way that:

-The driver dont loose the brakes.
-The driver dont loose the direction.
-The driver dont loose the vehicle control.


A logical way is cut the fuel.


News

img/news/000036.100.jpg
New version of LPA4, Car headlights on reminder
Now have differents times for differents...
Projects
/pjt/hmp1/05/hmp1-frente_schlabs.100.jpg
HMP1
Multisensor tester