Logo
Switch to desktop viewElectroincs in action
You are in: Products > On Sale > GNC2

CNG digital switch


Code : GNC2




Poduct comment::«Very good covered specs(ML)»
Status : Discontinued
This product is discontinued, if you need some like this, please contact us

CNG digital switch


This product is a revolution for CNG world.
Is a fuel switch for vehicles working at CNG.
The strong feature of this product is measure the pressure of tube in Bars.
With at least 10 more extra function make the best CNG product, the customers recommend one to another mouth to mouth.

Despite having so many functions, it is EASY to use, which is very important.
Built entirely of solid state, which means it has no moving parts or wear. That makes it easier to provide a 2 year warranty.

There are 2 variants with differents functions:
-Green digit switch ( the most economic)
-Red digit switch ( more functions )





Frequantly Asked Questions ( FAQ )

Frequently asked questions before purchase

My car is a single-point or multipoint injection, does it work?
IF all injection vehicles can use this switch.
My car is a carburetor (falcon, torino, fiorino, orion, etc), does the switch work?
IF all vehicles with CARBURETOR can use this switch.
Do I have to change my manometer?
In the kit comes the manometer, which is specially manufactured for our switch. So you just have to unscrew one and straighten the new
Is it easy to install?
Yes, it is installed almost the same as all common ones, we also recommend that the installation is done by someone trained for CNG.
My car is an injection, does it only change from gasoline to gas?
Yes, when you accelerate to more than 2000RPM it switches to gas automatically. And every time you start you always go to naphtha alone.
My car is a carburetor, does it change alone?
NO, but it helps you when you go from GAS to NAFTA, it gives you gas until you get naphtha to the carburetor.
Is the same switch for naphtha and carburetor?
YES, with a combination of keys the programs to make it work for your car.
Do you have a guarantee?
Yes, TWO years against manufacturing defects.
The XXX switch lasted me 6 months, how long will it last?
It is a first quality product, made and thought to last a long time. We do not include programmed obsolescence in our products.
It looks great, what size does it have?
The photo is close and deceiving, its dimensions or measurements are: 4.7cm X 2.8cm X 7.9cm (deep).
image
I have a closed loop installed, can I put the switch?
You can always put it, even if only in measurement mode. Only a few models of closed loops come with built-in switch, and even most of them have a way to override the internal switch. Loop Closed and GNC2

Installation FAQs
It does not open the naphtha passage, nor the gas passage (carburetor or injection)
The switch has been configured in fifth (5th) generation mode.
The engine shuts off while in GAS mode (carburetor)
The brown wire (ignition) is not properly located, the switch believes that the engine is off, and closes the gas.
GAS says but goes to nafta (injection)
The brown wire (ignition) is not properly located, the switch believes that the engine is off, and closes the gas.
I tighten NAFTA and the engine stops, it does not open the naphtha valve (carburetor)
The switch is configured in injection, See the configuration section to change it to Carburetor mode.
Injection vehicles do NOT have a naphtha seal valve.
I press GAS and the fuels are mixed (Injection)
The cable is not connected to the emulators, so the computer still sends naphtha.
DO NOT measure, it is written GAS, or AU.
The brown wire (ignition) is not properly located, the switch believes that the engine is off, and closes the gas.
The vehicle does not change only to GAS, my car is injection
Calibrate RPMs correctly or
The switch is configured as a carburetor

News

img/news/000040.100.jpg
Musical generator for teddy bear
One manufacturer of teddy bears ask for ...
Projects
/pjt/lpa3/foto1.100.jpg
LPA3
Automatic headlight switch